Suction Cup Mount+Tripod Adapter for GoPro HD Hero Hero2 Hero3 Hero3+ Camera

Suction Cup Mount+Tripod Adapter for GoPro HD Hero Hero2 Hero3 Hero3+ Camera

How to Use:

1. Remove the plastic film underneath the rubber pad.
2. Mounting the Suction Cup, mount to a dry clean smooth surface. (Use a cloth or rag to make sure the surface is dry and clean)
3. Mount the suction cup to the chosen surface, whilst holding the "Press Button", Flip the Hinge over to the opposite side to create a strong vacuumed suction.
4. Now you can mount your Camera to the suction cup screw adapter, and adjust the angle as required.
5. To un-mount the suction cup, just flip the hinge back to the opposite side again, then use one finger to slide the Small flap under suction pad up whilst lifting the entire suction cup mount from the surface.
6. That's it all done: just make sure to always mount to an clean, dry, smooth surface.

Note:

When using the suction cup mount on an moving vehicle please make sure you test it out on slow speeds to see how goes, as we are not responsible if your camera comes of the Suction Mount when in use. Just monitor the mount/camera when doing your first few runs to get accurate results on what is generally a good and max speed you should be doing with the mount/camera, and you should be all good.

• This item is an authentic parallel-import and items will be shipped from our supplier's warehouse and may take 1 to 2 days processing after payment confirmation. Parcel will be sent out by International Registered Post Courier Service and may take 4 to 10 working days for delivery
  . Please click Dpex (if 12 character) or UBI (if 21 character) to track.
  
  
• If this product requires a charger, An Australian Certified Charger will be provided with this product instead of the original charger.(*Selected product only)